Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Antioch?
Duct repair and sealing in Antioch typically runs $280 to $650 for a single accessible leak or disconnected run, and $850 to $2,400 for whole-system sealing on a typical Middle Tennessee ranch or two-story home. Those ranges cover contact cleaning of the affected runs, sealing materials, and a pressure check when the job calls for one. The written estimate you get on site sets the final price, and it’s free.
Antioch homes add their own wrinkle. A lot of the housing stock here went up in the 1980s and 1990s, and the flex duct from that era is now old enough that joints, boots, and plenum connections are the first things to give out. Add a crawlspace or an attic that swings from humid summer to cold snap and back, and those connections work loose faster than the ductwork in a newer build. We see it constantly: the furnace and the register both look fine, but the run between them is quietly leaking a fifth of the air before it ever reaches the room.
Key Takeaways
- Single leak repair: $280-$650. Whole-system seal: $850-$2,400.
- Full duct replacement, when the system is past sealing: $2,800-$7,500.
- Crawlspace and attic runs cost more because access is harder and the work takes longer.
- Sealing without cleaning is half a job. We clean first, then seal, then verify.
- Estimates are free. Call (833) 508-9940. We answer 24/7.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s how the line items stack up for Antioch homeowners this year. Every job is different, so treat these as typical ranges, not a quote.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Single joint or boot reseal | $280-$450 | One accessible leak, cleaned and sealed with mastic or foil tape |
| Disconnected or crushed run repair | $350-$650 | Reconnecting or replacing a failed section of flex or hard duct |
| Whole-system sealing (10-20 runs) | $850-$1,800 | Every accessible joint, boot, and plenum connection sealed |
| Whole-system sealing (20+ runs or two stories) | $1,400-$2,400 | Same scope on a larger or multi-zone system |
| Crawlspace or attic access surcharge | +$150-$400 | Extra time, equipment, and setup for tight or hot spaces |
| Duct cleaning before sealing | $350-$700 | Contact cleaning and extraction so sealant bonds to clean metal |
| Airflow verification after sealing | $120-$250 | Pressure and register-by-register checks (when the job includes it) |
| Full duct replacement | $2,800-$7,500 | New ductwork where the existing system is too far gone to seal |
What pushes a job toward the top of a range? Attic runs in a low-slope roof where you can’t stand up. Crawlspace work that needs a dust barrier so the house doesn’t get covered. Ductwork from three decades ago that’s torn at the joints and sagging from its hangers. And multi-story systems with two trunks, where there are simply more connections to seal. What keeps it low? A single-story ranch with a straight shot from the air handler to the registers and ductwork that’s intact enough to seal. That’s the fast, tidy job.
What Affects Duct Repair & Sealing Pricing in Antioch
- Where the ductwork lives. A crawlspace job is a very different afternoon than an attic job. Both add time, and time is the biggest line in the estimate. Antioch homes sit on both, so we look before we quote. Attic work in a Middle Tennessee summer is also hot enough that technicians work in shorter stretches, which stretches the job.
- Flex versus hard duct. Flex duct is quick to repair but fails more often at the joints. Rigid sheet metal is more durable and more work to repair properly because it’s sealed and fastened rather than just retaped.
- How many runs are leaking. One leak is a repair. Ten is a sealing project. The cost per run drops as the job grows, which is why whole-system sealing at $850-$2,400 often beats patching five runs one at a time.
- Whether you clean first. Sealing over dust and debris is wasted money. Contact cleaning with our Antioch Air Duct Cleaning Pros equipment comes first so the sealant bonds to metal, not to fuzz. It adds $350-$700 but it’s why the seal lasts.
- System condition. Old ductwork that’s crushed, torn, or sagging past its hangers may not be worth sealing. That’s when we talk about replacement honestly instead of selling you a seal that won’t hold.
- Local air quality context. Antioch sits in the Nashville bowl, and summer humidity plus heavy pollen means a leaky return pulls attic or crawlspace air straight into the living space. The reason to seal is comfort and air quality as much as efficiency, and that shapes which repairs we recommend first.
How We Repair and Seal Ductwork in Antioch
We run duct repair and sealing as an in-house service, which means we’re not just blowing air through the system and calling it done. Here’s how a typical job works.
Step one is finding the leaks. Visual inspection covers the accessible joints. Where it matters, pressure testing shows exactly how much air the system is losing and where. That’s the difference between guessing and knowing.
Step two is cleaning. Our Rotobrush contact-cleaning equipment scrubs the ductwalls rather than just blowing debris loose. Nikro extraction pulls the dislodged material out at high volume. Abatement Technologies filtration keeps the air in the house clean while we work. Clean metal seals properly. Dirty metal doesn’t.
Step three is repair. Failed sections get reconnected or replaced. Boots get sealed to the floor or wall. Plenum connections get sealed to the air handler. Seams and joints get mastic or foil tape rated for ductwork, not the cheap cloth tape that dries out and peels within a few seasons.
Step four is verification. Where the job includes it, we check pressures again to confirm the leaks are closed and airflow is balanced across the registers. You see the before and after, not just a bill.
One safety note, and it matters. We don’t recommend DIY sealing in a garage where a gas appliance shares the space, because sealing a return or supply there can change how combustion gases move. If your air handler or a gas furnace sits in a garage, that’s a conversation for a trained technician, not a weekend project. We flag it every time we see it.
Repair or Replace? How to Decide
Most Antioch ductwork built in the 1980s and 1990s has reached the age where the question comes up. Here’s how we think about it.
Repair makes sense when the ductwork is structurally sound and the leaks are at joints, boots, and connections. You’re sealing the weak points and the rest of the system still has decades left in it. Most jobs fall here.
Replacement makes sense when flex duct is crushed beyond reconnection, when sections have collapsed or come apart in the crawlspace, or when previous repairs have been taped over so many times that there’s nothing solid left to seal. Replacing a failed run or a whole system costs more up front, but sealing something that won’t hold wastes the money.
We’ll tell you which one you’re facing, with the numbers in front of you. That’s why the estimate is free and why it’s written down.
How to Save on Duct Repair & Sealing
The biggest cost driver is the number of leaks, so the best savings come from getting the whole system sealed at once rather than in pieces. Here’s what actually moves the number.
- Bundle cleaning with sealing. Doing them together saves a second trip and lets us verify the whole job in one pass.
- Fix the cause, not the symptom. If a run keeps coming apart, find out why. Hangers that have given out and sagging ductwork will pull a patch loose within a season. Re-hanging and sealing costs more today and less next year.
- Get the estimate in writing. A written estimate lets you compare line items, not just totals. Ours lays out what’s getting sealed and why.
- Ask about the return side. Homeowners focus on supply registers. Return leaks pull attic or crawlspace air into the house, and sealing them often costs little because they’re already accessible while we’re there.
- Address dryer vent safety at the same visit. A clogged dryer vent is a genuine fire hazard, and it’s a dedicated service we offer. It’s a separate line item, but doing it while we’re set up saves the trip.
- Know the timing advice. This one has a local twist. If you’re calling about a duct job in mid-summer, understand that attic work takes longer in the heat, which can push a larger job toward the higher end of its range. Booking a whole-system job in a cooler month often gets a tighter estimate.
Free estimates mean there’s no reason to guess. Call (833) 508-9940. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Why the Equipment Matters to the Price
Two duct companies can quote the same $1,200 to seal the same system, and you’ll get two different outcomes. The difference is what’s in the truck.
Our Rotobrush system does contact-based mechanical cleaning. The ductwall is scrubbed, not just blown out with compressed air. Nikro extraction equipment removes high-volume debris and fine particulate. Abatement Technologies air filtration is the remediation-grade standard used in serious contaminant work, which is a level above what most cleaning-only operations carry. And our familiarity with Honeywell and Aprilaire filtration products means when we recommend a filter or an air-quality upgrade after sealing, it’s grounded in the equipment itself, not a sales script. Guardsman equipment rounds out the kit.
What that means for your estimate: the price includes the method, not just the visit. Cheap sealing is often just a pass with a caulk gun and hope. Ours includes cleaning, extraction, proper materials, and a verification pass. Our technicians have up to 13 years of experience, which is also why we can tell you quickly whether a job is a seal or a replacement.
FAQs – Duct Repair & Sealing Cost
How much does duct repair and sealing cost in Antioch?
Typical range is $280-$650 for a single accessible leak and $850-$2,400 for whole-system sealing. The exact number depends on access, run count, and whether cleaning is needed first. Call (833) 508-9940 for a free written estimate.
Is it cheaper to repair or replace ductwork?
Repair is cheaper in the short term when the ductwork is structurally sound: a single repair at a few hundred dollars against thousands for replacement. Replacement wins when the ductwork is crushed or collapsed past sealing. A written estimate is the only way to know which you’re facing. Call (833) 508-9940 and we’ll walk the system with you.
How much does duct cleaning cost before sealing in Antioch?
$350-$700 for a typical Antioch home, sometimes more for larger or multi-story systems. Cleaning first is what lets sealant bond properly. Skipping it usually means paying twice. Call (833) 508-9940 for a combined quote.
Will sealing my ducts lower my energy bill?
We won’t quote a percentage, because it varies by system and household. What we can say is that a duct system leaking at its joints moves heated or cooled air into the attic or crawlspace instead of the rooms. Sealing that leak is the fix, and the efficiency gain shows up on your bill. Call (833) 508-9940 for a free estimate.
Do you work in a crawlspace or attic in Antioch?
Yes. Crawlspace and attic runs are common in Antioch homes and carry an access surcharge of roughly $150-$400 on the estimate. We quote it upfront so there are no surprises. Call (833) 508-9940.
How long does duct sealing take?
A single leak is often a couple of hours. Whole-system sealing typically takes most of a working day on a single-story home and longer on a two-story with two trunks. Call (833) 508-9940 and we can ballpark it on the phone.
Can you fix ducts that a previous company taped over?
Yes, we can. Taped-over joints often need the old tape removed and the joint resealed properly, which adds time but is usually still far cheaper than replacement. Call (833) 508-9940 for an assessment.
Do you offer same-day duct repair in Antioch?
When the schedule allows, yes. Call (833) 508-9940. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Book a Free Estimate in Antioch
If your ducts are leaking, the fix is a written estimate, not a guess. Call (833) 508-9940 and we’ll come out, look at the system, and give you a clear, free estimate with the line items in front of you. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you already know you want the wider service, our home page covers cleaning and Antioch Air Duct Cleaning Pros here in the area.
Pricing reflects the Antioch market as of 2026. Antioch Air Duct Cleaning Pros offers free estimates – call (833) 508-9940.
What Our Customers Say
"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Rafael Hernandez"Two guys, about three hours, plastic down at every register, and they wiped the vent covers before putting them back."
- Oscar Rodriguez"Job was done well and the house smells better. There was some dust knocked loose around a couple of the registers that I had to wipe down afterward."
- Colleen Padgett